Mine Index 0806   Peabody Coal Company,   Peabody No. 5 Mine

From ILMINES WIKI
Disclaimer
INTERPRETING A MINE SUMMARY SHEET
Unlocated Mines In: Sangamon unlocated
County: Sangamon
Quadrangle: Pawnee
County Coal Data: Sangamon
Shown On Map: Yes
Unlocated: No
MSHA ID:

Mine Index Number: 0806

Company Name: Peabody Coal Company
Mine Name: Peabody No. 5 Mine
Start Date: 1895 End Date: February 1921
Type of Mine: Underground
Total acres shown: 901
Acres after map date: General Area of mining acres shown:

Shaft, Slope, Drift or Tipple Location(s)

Type County Township-Range Section Part Section
Main shaft Sangamon 13N 5W 12 SE SW NE
Air shaft [1] Sangamon 13N 5W 12 SW SE NE

Geology

Thickness (ft)
Seam Depth (ft) Min Max Ave Mining Method
Herrin 320-325 5.75-7.5 RPP

Geological Problems Reported

One fault was encountered, with a 2 to 3 foot displacement. The roof was 2 inches of shale with limestone above. Rolls were present, up to 100 feet wide. Where rolls occur, the coal pinched down to 4 feet.

Production

Company Mine Name Date Production (tons)
D. J. Lloyd Lloyd 1895-1896 2,000
Horse Creek Coal Company Horse Creek 1896-1900 31,969
Victor Coal Company Victor 1900-1905 851,136
Illinois Midland Coal Company Victor, Illinois Midland No. 5 1905-1913 2,593,702
Peabody Coal Company Peabody No. 5 1913-1921 2,104,339
Total Production: 5,583,146

Production Notes

Coal Report production (if available)

Sources of Data

Source Map Map Date Original Scale Digitized Scale Map Type
Microfilm, document 351229 Undated [2] 1:2400 1:5296 Not final

Annotated Bibliography (Data source - brief description of information)

Coal Reports - Production, ownership, years of operation.
Directory of Illinois Coal Mines (Sangamon County) - Mine names, mine index, ownership, years of operation.
Mine notes (Sangamon County) - Mine type, shaft location, seam, depth, thickness.
Microfilm map, document 351229, reel 03134, frames 454, 455 - Shaft locations, mine outline, mining method.

Mine Notes

Mine Images

Photographs

Notes

  1. The old hoist shaft was converted into an air shaft in 1901, when the new hoist shaft was completed.
  2. No dates are shown on this map, although the microfilm documentation suggests the map was submitted in 1923. The map is later than an earlier microfilm (document 351400) dated 7-1-1918. The mined area shown on the accompanying map is the approximate size expected for the reported production. This suggests that the mine outline is complete.